The La Crosse Atomic Digital Wall Clock is an essential tool for accurate timekeeping combined with indoor and outdoor temperature monitoring and moon phase display. This guide will walk you through setting up and using your clock to take full advantage of its features.
Initial Setup: Powering Up Your Clock
- Prepare the Outdoor Sensor:
- Insert 2 AA batteries into the TX141-Bv4 sensor.
- Power Up the Clock:
- Insert 2 AA batteries into the clock to activate it.
- Connect with the Atomic Time Signal:
- The clock automatically searches for the atomic time signal upon power-up and at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. The signal icon flashes while searching and remains solid when connected.
- To manually initiate a search, press the “SET” button.
Navigating the Settings Menu
- Access the Settings:
- Hold the “SET” button until the display changes.
- Adjust Values:
- Use the + or - buttons to modify settings such as language (English or Spanish), beep sound, atomic time on/off, daylight saving time (DST), time zone, hour, minute, year, month, date, and temperature unit (°F/°C).
- Confirm and Exit:
- Press “SET” to confirm each setting or press the “SNOOZE” button to exit at any time.
Time Zone:
Choose your time zone from options such as:
- ZONE-EST (Eastern)
- ZONE-CST (Central)
- ZONE-PST (Pacific), and more.
Using the Time Alarm Feature
- Set the Alarm:
- Hold the “ALARM” button until “ALARM” displays and the hour flashes.
- Adjust the hour and minute using the + or - buttons. Confirm with “ALARM”.
- Activate/Deactivate the Alarm:
- Press “ALARM” to toggle the alarm on/off. An icon will indicate activation.
- Snooze Function:
- Press “SNOOZE” to delay the alarm for 10 minutes. The alarm will sound for 2 minutes if not silenced and turn off automatically.
Monitoring Temperature and Moon Phases
- Temperature Records:
- Press the + button once to see high indoor/outdoor temperatures and twice for low temperatures. These records reset daily at midnight.
- Moon Phase Display:
- The clock automatically shows the current moon phase based on the date.
Troubleshooting Outdoor Sensor Connection
- Search for Sensor:
- Hold the “-” button to prompt the clock to search for the outdoor sensor.
- If Sensor Does Not Connect:
- Bring the sensor near the clock, remove power from both, and reinsert the batteries.
- For additional assistance, visit [bit.ly/basic_restart](http://bit.ly/basic_restart).
Maintenance and Battery Replacement Tips
- Always use high-quality batteries and replace the complete set at once.
- Ensure battery contacts are clean and properly inserted.
- Remove batteries during long periods of inactivity to prevent leakage.
Low Battery Indicators:
- Replace batteries when the icon appears next to the time or outdoor temperature reading.
Warranty and Support Information
- The La Crosse Atomic Digital Wall Clock comes with a 1-year limited warranty. For full details, visit [La Crosse Technology Warranty](http://www.lacrossetechnology.com/pages/warranty).
- To extend your warranty for free, register at [bit.ly/513-1417v6_register](https://bit.ly/513-1417v6_register).
Customer Support:
- Available Monday to Friday, 8 am to 6 pm CST. Call 1.608.782.1610 or visit [bit.ly/513-1417v6_support](https://bit.ly/513-1417v6_support).
Final Thoughts
With its precise atomic timekeeping, reliable temperature monitoring, and lunar cycle display, the La Crosse Atomic Digital Wall Clock enhances your daily schedule and home environment. Follow these simple steps and maintenance tips to keep your clock functioning perfectly.